New Construction & Retrofit Installations
2-Wire System Installation
We design and install 2-wire decoder irrigation systems from the ground up on large commercial properties — golf courses, university campuses, corporate parks, HOA communities, and municipal facilities. We also retrofit existing multi-wire systems to 2-wire architecture without replacing all underground infrastructure.
Overview
A properly installed 2-wire decoder system is the most scalable, maintainable irrigation architecture available for large commercial properties. One pair of wires — run as a single path through the property — carries both power and digital addressing signals to every decoder and valve on the system. A 400-zone system requires the same two wires as a 20-zone system.
Our installation team includes licensed Texas irrigators with deep manufacturer certifications across Hunter, Rain Bird, Toro, and Baseline 2-wire platforms. We don't learn on your property — we've done this on hundreds of commercial sites across Texas.
For retrofit projects, we specialize in migrating existing multi-wire systems to 2-wire architecture while preserving as much existing underground infrastructure (valves, heads, laterals) as possible. Many retrofits can be completed in phases to minimize landscape disruption and spread capital cost.
What's Included
- Full hydraulic engineering and system design included
- Certified installation with all manufacturer specs met
- Compatible with all major 2-wire platforms: Hunter ACC2, Rain Bird ESP-LXIVM, Toro Sentinel, Baseline BC3000
- Pressure testing and zone verification before handoff
- As-built documentation provided for every project
- Phased installation available for large or occupied properties
Best for
New commercial construction, golf courses, large HOA retrofits, campus facilities
How We Do It
A defined process that produces consistent, documented results on every project.
Site Survey & Assessment
We walk the property, assess existing infrastructure, review water supply and pressure data, and identify any site-specific engineering challenges before any design work begins.
Hydraulic Design & Zone Layout
Our engineers calculate pressure loss across the system, size distribution pipe, and design zone coverage to meet precipitation rate targets for the specific plant and soil types on the property.
Permitting & Coordination
We prepare permit-ready drawings to Texas municipal standards and coordinate with water districts, civil engineers, or general contractors as required for the project.
Installation
Field installation by certified 2-wire technicians following manufacturer specs and our own quality checklist. Every decoder is addressed, tested individually, and logged.
System Commissioning
Full pressure testing, zone-by-zone coverage verification, controller programming, and flow sensor calibration. We don't hand off until every zone is verified.
Documentation & Training
As-built drawings, decoder address maps, programming documentation, and on-site training for your facilities team or property manager.
Who This Service Is For
- Golf courses and country clubs
- University and college campuses
- Corporate headquarters and office parks
- HOA communities and master-planned developments
- Municipal parks and public grounds
- Healthcare campuses
- Hospitality properties and resorts
Common Questions
How long does a commercial 2-wire installation take?
Scope varies significantly by property size and complexity. A typical 100–200 zone commercial installation runs 4–8 weeks. Large golf course or campus installations may run 3–6 months. Retrofit projects are often phased over one or more seasons.
Can I keep my existing valves and sprinkler heads?
In most cases, yes. Retrofit projects typically preserve existing valves, heads, and lateral piping. We replace the control wiring and add decoder modules at each valve. This dramatically reduces cost compared to full system replacement.
What 2-wire platforms do you work with?
We are certified on Hunter ACC2, Rain Bird ESP-LXIVM, Toro Sentinel, and Baseline BC3000. We'll recommend the platform that best fits your property's zone count, feature requirements, and long-term support needs.
Do you pull permits?
Yes. We handle all required permits as part of every installation project. Texas law requires a licensed irrigator to design and oversee commercial irrigation installations, and we are fully licensed and insured.
Other Services
System Design & Engineering
Our engineering team provides complete irrigation system design services using hydraulic analysis, soil profiling, evapotranspiration data, and water district requirements. We produce permit-ready drawings and specifications that field crews can build from — or that you can put out to bid.
Learn moreTroubleshooting & Repair
2-wire systems have unique failure modes that standard irrigation technicians aren't equipped to diagnose. Our specialists use professional diagnostic equipment to locate wire faults, identify failed decoders, and resolve controller programming issues — typically in a single visit.
Learn morePreventive Maintenance
Commercial irrigation systems in Texas take a beating — from summer heat stress to freeze damage to soil movement. Our preventive maintenance programs include regular inspections, seasonal adjustments, and documented system audits to catch problems before they become expensive failures.
Learn moreReady to talk about your project?
Call for a free consultation or fill out our quote form and we'll get back to you within one business day.